PRICES & SPECIFICATIONS
 



















UP-1   $239.95 msrp
C-UL Listed for  Dry or Damp Location
Any Standard Color

Weight without bulb:   2.50 lbs.
Length of can:  15.00"
Height at front:  11.12"
Width at front:  10.25"
Height of yoke:  8.00"
UP-2   $139.95 msrp
C-UL Listed for  Dry or Damp Location
Any Standard Color
Weight without bulb:  1.50 lbs.
Length of can:  13.00"
Height at front:  7.75"
Width at front:  8.16"
Height of yoke:  6.00"
UP-3  $49.95 msrp
C-UL Listed for  Dry or Damp Location
Any Standard Color
Weight without bulb:  .50 lbs.
Length of can:  6.25"
Height at front:  3.75"
Width at front:  3.75"
Height of yoke:  3.00"


UP-4/38
 $129.95 msrp
C-UL Listed for  Dry or Damp Location
Any Standard Color
Weight without bulb:  1.25 lbs.
Length of can:  8.12"
Height at front:  8.12"
Width at front:  8.12"
Height of yoke:  8.00"
UP-4/56
$139.95 msrp
C-UL Listed for  Dry or Damp Location
Any Standard Color
Weight without bulb:  1.25 lbs.
Length of can:  8.12"
Height at front:  8.12"
Width at front:  8.12"
Height of yoke:  8.00"










UP-4 Ultra
$329.95 msrp
C-UL Listed for  Dry or Damp Location
Any Standard Color
Weight without bulb:  2.75 lbs.
Length of can:  8.12"
Height at front:  8.12"
Width at front:  8.12"
Height of yoke:  8.00"

*Prices & Specifications subject to change without notice*
July 1, 2008


*All of the products on this site are UL Listed.*
*They were manufactured/produced prior to our withdrawal from the UL Program and met UL requirements at that time.*
ECONOMIC - Saving points for the consumer:
Lamps last longer because of the patented
lamp mounting system and flow through
convection cooling ventilation, the lamps
operate cooler and last longer.  There is also
lower freight cost; the low weight and volume
reduces freight cost.  This lower freight cost
actually produces a lower per unit fixture cost
to you the customer.
SAFER - C.E. & U.L. Listed for dry or damp location:
Uni-Par housings and yokes will not rust and all metal hardware  
parts are either stainless steel, triple coated hardened steel, or aluminum.
Electrical connections are sealed inside the ceramic lamp socket and the wire is
silicon coated with a silicon/woven fiberglass braided outer coat. This is covered
with another fiberglass braid and is coated again with acrylic that covers the
wiring harness from the housing to the electrical plug.  The plastic housing can
not conduct electricity from a shorted cable or lamp. The outside of the housing
will not become hot enough to burn someone who accidentally touches it for a few
seconds. The high temperature plastic gel-frames are safer because all corners
are rounded unlike old metal gel-frames. The user can easily load color media by
simply folding open the gel-frame.  The gel-frame is held in place by molded-in
plastic pinch tabs.
PRECISE - Balanced yoke mounting:
Unipar's are designed so that when the lamp is
installed, the unit is balanced at the yoke
mounting point and very little force is required
to keep the  fixture aimed in the proper
direction.  The yoke is attached with a carriage
bolt, a flat washer, and a self locking nut on
each side. This combination of parts produces a
friction controlled pivot point that only needs
to be adjusted once.
DURABLE - Every Uni-Par has a warranty:
Uni-Par's are so tough that we are the only par can manufacturer in the world to
have a "LIMITED LIFETIME WARRANTY / RECYCLE" program.  If one of our par cans
should break for any reason we will replace it for only the cost to recycle the
product; 25% of retail price.   We tracked 8,000 units for a year, out of which only
7 were returned for breakage.  These patented stage lighting fixtures are made of
high impact, high temperature, engineered plastic. These are the same materials
used in new airliners and even the space program.  our units are Injection molded
so they don't dent and the color is all the way through so scratches aren't visible.